From dc52b1a919e30b4b745eb420f18c57b9b8b6f6e5 Mon Sep 17 00:00:00 2001 From: Fabian Keil Date: Sun, 28 Jun 2015 17:06:35 +0200 Subject: [PATCH 005/257] i386: Copy GENERIC to ELECTRO_BLOAT Obtained from: ElectroBSD --- sys/i386/conf/ELECTRO_BLOAT | 382 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 382 insertions(+) create mode 100644 sys/i386/conf/ELECTRO_BLOAT diff --git a/sys/i386/conf/ELECTRO_BLOAT b/sys/i386/conf/ELECTRO_BLOAT new file mode 100644 index 000000000000..aefc50753f0d --- /dev/null +++ b/sys/i386/conf/ELECTRO_BLOAT @@ -0,0 +1,382 @@ +# +# GENERIC -- Generic kernel configuration file for FreeBSD/i386 +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ + +cpu I486_CPU +cpu I586_CPU +cpu I686_CPU +ident GENERIC + +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support + +options SCHED_ULE # ULE scheduler +options PREEMPTION # Enable kernel thread preemption +options INET # InterNETworking +options INET6 # IPv6 communications protocols +options IPSEC # IP (v4/v6) security +options TCP_OFFLOAD # TCP offload +options SCTP # Stream Control Transmission Protocol +options FFS # Berkeley Fast Filesystem +options SOFTUPDATES # Enable FFS soft updates support +options UFS_ACL # Support for access control lists +options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options MD_ROOT # MD is a potential root device +options NFSCL # Network Filesystem Client +options NFSD # Network Filesystem Server +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL +options MSDOSFS # MSDOS Filesystem +options CD9660 # ISO 9660 Filesystem +options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework +options GEOM_PART_GPT # GUID Partition Tables. +options GEOM_RAID # Soft RAID functionality. +options GEOM_LABEL # Provides labelization +options COMPAT_FREEBSD4 # Compatible with FreeBSD4 +options COMPAT_FREEBSD5 # Compatible with FreeBSD5 +options COMPAT_FREEBSD6 # Compatible with FreeBSD6 +options COMPAT_FREEBSD7 # Compatible with FreeBSD7 +options COMPAT_FREEBSD9 # Compatible with FreeBSD9 +options COMPAT_FREEBSD10 # Compatible with FreeBSD10 +options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI +options KTRACE # ktrace(1) support +options STACK # stack(9) support +options SYSVSHM # SYSV-style shared memory +options SYSVMSG # SYSV-style message queues +options SYSVSEM # SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. +options KBD_INSTALL_CDEV # install a CDEV entry in /dev +options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) +options AUDIT # Security event auditing +options CAPABILITY_MODE # Capsicum capability mode +options CAPABILITIES # Capsicum capabilities +options MAC # TrustedBSD MAC Framework +options KDTRACE_HOOKS # Kernel DTrace hooks +options DDB_CTF # Kernel ELF linker loads CTF data +options INCLUDE_CONFIG_FILE # Include this file in kernel +options RACCT # Resource accounting framework +options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default +options RCTL # Resource limits + +# Debugging support. Always need this: +options KDB # Enable kernel debugger support. +options KDB_TRACE # Print a stack trace for a panic. +# For full debugger support use (turn off in stable branch): +options DDB # Support DDB. +options GDB # Support remote GDB. +options DEADLKRES # Enable the deadlock resolver +options INVARIANTS # Enable calls of extra sanity checking +options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +options WITNESS # Enable checks to detect deadlocks and cycles +options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones + +# To make an SMP kernel, the next two lines are needed +options SMP # Symmetric MultiProcessor Kernel +device apic # I/O APIC + +# CPU frequency control +device cpufreq + +# Bus support. +device acpi +device pci +options PCI_HP # PCI-Express native HotPlug +options PCI_IOV # PCI SR-IOV support + +# Floppy drives +device fdc + +# ATA controllers +device ahci # AHCI-compatible SATA controllers +device ata # Legacy ATA/SATA controllers +device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA +device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA + +# SCSI Controllers +device ahc # AHA2940 and onboard AIC7xxx devices +options AHC_REG_PRETTY_PRINT # Print register bitfields in debug + # output. Adds ~128k to driver. +device ahd # AHA39320/29320 and onboard AIC79xx devices +options AHD_REG_PRETTY_PRINT # Print register bitfields in debug + # output. Adds ~215k to driver. +device esp # AMD Am53C974 (Tekram DC-390(T)) +device hptiop # Highpoint RocketRaid 3xxx series +device isp # Qlogic family +#device ispfw # Firmware for QLogic HBAs- normally a module +device mpt # LSI-Logic MPT-Fusion +device mps # LSI-Logic MPT-Fusion 2 +device mpr # LSI-Logic MPT-Fusion 3 +#device ncr # NCR/Symbios Logic +device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') +device trm # Tekram DC395U/UW/F DC315U adapters + +device adv # Advansys SCSI adapters +device adw # Advansys wide SCSI adapters +device aha # Adaptec 154x SCSI adapters +device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. +device bt # Buslogic/Mylex MultiMaster SCSI adapters + +device ncv # NCR 53C500 +device nsp # Workbit Ninja SCSI-3 +device stg # TMC 18C30/18C50 +device isci # Intel C600 SAS controller + +# ATA/SCSI peripherals +device scbus # SCSI bus (required for ATA/SCSI) +device ch # SCSI media changers +device da # Direct Access (disks) +device sa # Sequential Access (tape etc) +device cd # CD +device pass # Passthrough device (direct ATA/SCSI access) +device ses # Enclosure Services (SES and SAF-TE) +#device ctl # CAM Target Layer + +# RAID controllers interfaced to the SCSI subsystem +device amr # AMI MegaRAID +device arcmsr # Areca SATA II RAID +device ciss # Compaq Smart RAID 5* +device dpt # DPT Smartcache III, IV - See NOTES for options +device hptmv # Highpoint RocketRAID 182x +device hptnr # Highpoint DC7280, R750 +device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx +device hpt27xx # Highpoint RocketRAID 27xx +device iir # Intel Integrated RAID +device ips # IBM (Adaptec) ServeRAID +device mly # Mylex AcceleRAID/eXtremeRAID +device twa # 3ware 9000 series PATA/SATA RAID +device tws # LSI 3ware 9750 SATA+SAS 6Gb/s RAID controller + +# RAID controllers +device aac # Adaptec FSA RAID +device aacp # SCSI passthrough for aac (requires CAM) +device aacraid # Adaptec by PMC RAID +device ida # Compaq Smart RAID +device mfi # LSI MegaRAID SAS +device mlx # Mylex DAC960 family +device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s +device pmspcv # PMC-Sierra SAS/SATA Controller driver +device pst # Promise Supertrak SX6000 +device twe # 3ware ATA RAID + +# NVM Express (NVMe) support +device nvme # base NVMe driver +device nvd # expose NVMe namespace as disks, depends on nvme + +# atkbdc0 controls both the keyboard and the PS/2 mouse +device atkbdc # AT keyboard controller +device atkbd # AT keyboard +device psm # PS/2 mouse + +device kbdmux # keyboard multiplexer + +device vga # VGA video card driver +options VESA # Add support for VESA BIOS Extensions (VBE) + +device splash # Splash screen and screen saver support + +# syscons is the default console driver, resembling an SCO console +device sc +options SC_PIXEL_MODE # add support for the raster text mode + +# vt is the new video console driver +device vt +device vt_vga + +device agp # support several AGP chipsets + +# Power management support (see NOTES for more options) +#device apm +# Add suspend/resume support for the i8254. +device pmtimer + +# PCCARD (PCMCIA) support +# PCMCIA and cardbus bridge support +device cbb # cardbus (yenta) bridge +device pccard # PC Card (16-bit) bus +device cardbus # CardBus (32-bit) bus + +# Serial (COM) ports +device uart # Generic UART driver + +# Parallel port +device ppc +device ppbus # Parallel port bus (required) +device lpt # Printer +device ppi # Parallel port interface device +#device vpo # Requires scbus and da + +device puc # Multi I/O cards and multi-channel UARTs + +# PCI Ethernet NICs. +device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE +device de # DEC/Intel DC21x4x (``Tulip'') +device em # Intel PRO/1000 Gigabit Ethernet Family +device igb # Intel PRO/1000 PCIE Server Gigabit Family +device ixgb # Intel PRO/10GbE Ethernet Card +device le # AMD Am7900 LANCE and Am79C9xx PCnet +device ti # Alteon Networks Tigon I/II gigabit Ethernet +device txp # 3Com 3cR990 (``Typhoon'') +device vx # 3Com 3c590, 3c595 (``Vortex'') + +# PCI Ethernet NICs that use the common MII bus controller code. +# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! +device miibus # MII bus support +device ae # Attansic/Atheros L2 FastEthernet +device age # Attansic/Atheros L1 Gigabit Ethernet +device alc # Atheros AR8131/AR8132 Ethernet +device ale # Atheros AR8121/AR8113/AR8114 Ethernet +device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet +device bfe # Broadcom BCM440x 10/100 Ethernet +device bge # Broadcom BCM570xx Gigabit Ethernet +device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn +device dc # DEC/Intel 21143 and various workalikes +device et # Agere ET1310 10/100/Gigabit Ethernet +device fxp # Intel EtherExpress PRO/100B (82557, 82558) +device gem # Sun GEM/Sun ERI/Apple GMAC +device hme # Sun HME (Happy Meal Ethernet) +device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet +device lge # Level 1 LXT1001 gigabit Ethernet +device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet +device nfe # nVidia nForce MCP on-board Ethernet +device nge # NatSemi DP83820 gigabit Ethernet +device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') +device re # RealTek 8139C+/8169/8169S/8110S +device rl # RealTek 8129/8139 +device sf # Adaptec AIC-6915 (``Starfire'') +device sge # Silicon Integrated Systems SiS190/191 +device sis # Silicon Integrated Systems SiS 900/SiS 7016 +device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet +device ste # Sundance ST201 (D-Link DFE-550TX) +device stge # Sundance/Tamarack TC9021 gigabit Ethernet +device tl # Texas Instruments ThunderLAN +device tx # SMC EtherPower II (83c170 ``EPIC'') +device vge # VIA VT612x gigabit Ethernet +device vr # VIA Rhine, Rhine II +device vte # DM&P Vortex86 RDC R6040 Fast Ethernet +device wb # Winbond W89C840F +device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') + +# ISA Ethernet NICs. pccard NICs included. +device cs # Crystal Semiconductor CS89x0 NIC +# 'device ed' requires 'device miibus' +device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards +device ex # Intel EtherExpress Pro/10 and Pro/10+ +device ep # Etherlink III based cards +device fe # Fujitsu MB8696x based cards +device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. +device sn # SMC's 9000 series of Ethernet chips +device xe # Xircom pccard Ethernet + +# Wireless NIC cards +device wlan # 802.11 support +options IEEE80211_DEBUG # enable debug msgs +options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's +options IEEE80211_SUPPORT_MESH # enable 802.11s draft support +device wlan_wep # 802.11 WEP support +device wlan_ccmp # 802.11 CCMP support +device wlan_tkip # 802.11 TKIP support +device wlan_amrr # AMRR transmit rate control algorithm +device an # Aironet 4500/4800 802.11 wireless NICs. +device ath # Atheros NICs +device ath_pci # Atheros pci/cardbus glue +device ath_hal # pci/cardbus chip support +options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors +options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation +options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and later +device ath_rate_sample # SampleRate tx rate control for ath +#device bwi # Broadcom BCM430x/BCM431x wireless NICs. +#device bwn # Broadcom BCM43xx wireless NICs. +device ipw # Intel 2100 wireless NICs. +device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs. +device iwn # Intel 4965/1000/5000/6000 wireless NICs. +device malo # Marvell Libertas wireless NICs. +device mwl # Marvell 88W8363 802.11n wireless NICs. +device ral # Ralink Technology RT2500 wireless NICs. +device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. +#device wl # Older non 802.11 Wavelan wireless NIC. +device wpi # Intel 3945ABG wireless NICs. + +# Pseudo devices. +device loop # Network loopback +device random # Entropy device +device padlock_rng # VIA Padlock RNG +device rdrand_rng # Intel Bull Mountain RNG +device ether # Ethernet support +device vlan # 802.1Q VLAN support +device tun # Packet tunnel. +device md # Memory "disks" +device gif # IPv6 and IPv4 tunneling +device firmware # firmware assist module + +# The `bpf' device enables the Berkeley Packet Filter. +# Be aware of the administrative consequences of enabling this! +# Note that 'bpf' is required for DHCP. +device bpf # Berkeley packet filter + +# USB support +options USB_DEBUG # enable debug msgs +device uhci # UHCI PCI->USB interface +device ohci # OHCI PCI->USB interface +device ehci # EHCI PCI->USB interface (USB 2.0) +device xhci # XHCI PCI->USB interface (USB 3.0) +device usb # USB Bus (required) +device ukbd # Keyboard +device umass # Disks/Mass storage - Requires scbus and da + +# Sound support +device sound # Generic sound driver (required) +device snd_cmi # CMedia CMI8338/CMI8738 +device snd_csa # Crystal Semiconductor CS461x/428x +device snd_emu10kx # Creative SoundBlaster Live! and Audigy +device snd_es137x # Ensoniq AudioPCI ES137x +device snd_hda # Intel High Definition Audio +device snd_ich # Intel, NVidia and other ICH AC'97 Audio +device snd_via8233 # VIA VT8233x Audio + +# MMC/SD +device mmc # MMC/SD bus +device mmcsd # MMC/SD memory card +device sdhci # Generic PCI SD Host Controller + +# VirtIO support +device virtio # Generic VirtIO bus (required) +device virtio_pci # VirtIO PCI device +device vtnet # VirtIO Ethernet device +device virtio_blk # VirtIO Block device +device virtio_scsi # VirtIO SCSI device +device virtio_balloon # VirtIO Memory Balloon device + +# HyperV drivers and enchancement support +device hyperv # HyperV drivers + +# Xen HVM Guest Optimizations +# NOTE: XENHVM depends on xenpci. They must be added or removed together. +options XENHVM # Xen HVM kernel infrastructure +device xenpci # Xen HVM Hypervisor services driver + +# VMware support +device vmx # VMware VMXNET3 Ethernet + +# The crypto framework is required by IPSEC +device crypto # Required by IPSEC -- 2.11.0